Genie TMZ-10 Bedienungsanleitung PDF herunterladen (Seite 28)

26 Genie TMZ-50/30 & Genie TMZ-17/10 Part No. 72896

Operator's Manual First Edition • Third Printing

OPERATING INSTRUCTIONS

Material Lifting Configuration

Observe and Obey:

Maintain safe distances between the operator,

machine and fixed objects.

Be aware of the direction the boom will travel

when using the platform controls.

Material Lifting Configuration

Set up

1 Turn the key switch to the off position.

2 Remove the pin that secures the material lifting

hook to the base. Remove the material lifting

hook.

3 Disconnect the platform controls from the

platform.

4 Remove the platform controls. Open the clamp

on the back of the platform controls and slide

the controls up and off.

5 Open the controls side turntable cover.

6 Disconnect the electrical cord on the bottom

right side of the ground control box. Connect

the platform control cord disconnected in step 3

to the ground control box. Close the turntable

cover.

7 Support the platform. Remove the toggle pin

that secures the platform to the jib boom.

8 Lift the platform up and remove it from the

machine.

9 To install the material lifting hook, insert the

bottom rail into the platform mounting bracket

and rotate up into position. Insert the toggle pin.

10 Operate the material lifting hook from the

ground with the platform controls. The key

switch should be turned to the platform control

position.

11 Reverse the above process to install the

platform and return the machine to a personnel

lifting configuration.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

Keine Kommentare

Genie TMZ-10 Bedienungsanleitung Seite 28