Genie AWP 114002 Bedienungsanleitung PDF herunterladen (Seite 26)

Operator’s Manual Third Edition • Fourth Printing

24 Genie AWP Super Series Part No. 114002

TRANSPORT INSTRUCTIONS

Winching the Machine onto a

Flatbed Truck

1 Fully lower the platform.

2 Push in the red Emergency Stop buttons, turn

the key switch to the off position and remove

the key.

3 Remove the outriggers from the base and place

them in the storage sockets.

4 Inspect the entire machine for loose or

unsecured items.

5 Connect the cable to the winching point located

at the rear of the base.

6 Carefully winch the machine onto the truck.

7 Secure the machine base to the transport

vehicle. See Securing the Machine.

Loading the Machine With

a Crane

Use the lifting eye mounted on the rear mast

column.

The battery pack must be removed before lifting the

machine with a crane. Disconnect the battery plug

before removing the battery pack.

Be sure to inspect the machine

and remove any loose or

unsecured items.

Always place the lifting hook

through the lifting eye so that it

points away from the machine.

Securing the Machine

Use chains or straps of ample load capacity.

Use a minimum of 2 chains.

Adjust the rigging to prevent damage to the chains.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Keine Kommentare

Genie AWP 114002 Bedienungsanleitung Seite 26